The Scene to which this Game Object belongs. A Game Object can only belong to one Scene at a time.
The horizontal position of this Game Object in the world.
The vertical position of this Game Object in the world.
The key, or instance of the Texture this Game Object will use to render with, as stored in the Texture Manager.
Optionalframe: string | number
An optional frame from the Texture this Game Object is rendering with.
The active state of this Game Object.
A Game Object with an active state of true is processed by the Scenes UpdateList, if added to it.
An active object is one which is having its logic and internal systems updated.
The alpha value of the Game Object, between 0 (fully transparent) and 1 (fully opaque).
This is a global value that impacts the entire Game Object. Setting it also updates
all four corner alpha values (alphaTopLeft, alphaTopRight, alphaBottomLeft,
alphaBottomRight) to the same value. The input is clamped to the range [0, 1].
The alpha value starting from the bottom-left of the Game Object. This value is interpolated from the corner to the center of the Game Object.
The alpha value starting from the bottom-right of the Game Object. This value is interpolated from the corner to the center of the Game Object.
The alpha value starting from the top-left of the Game Object. This value is interpolated from the corner to the center of the Game Object.
The alpha value starting from the top-right of the Game Object. This value is interpolated from the corner to the center of the Game Object.
The angle of this Game Object as expressed in degrees.
Phaser uses a right-hand clockwise rotation system, where 0 is right, 90 is down, 180/-180 is left and -90 is up.
If you prefer to work in radians, see the rotation property instead.
Sets the Blend Mode being used by this Game Object.
This can be a const, such as Phaser.BlendModes.SCREEN, or an integer, such as 4 (for Overlay)
Under WebGL only the following Blend Modes are available:
Canvas has more available depending on browser support.
You can also create your own custom Blend Modes in WebGL.
Blend modes have different effects under Canvas and WebGL, and from browser to browser, depending on support. Blend Modes also cause a WebGL batch flush should it encounter a new blend mode. For these reasons try to be careful about the construction of your Scene and the frequency with which blend modes are used.
This Game Object's Physics Body.
A bitmask that controls if this Game Object is drawn by a Camera or not.
Not usually set directly, instead call Camera.ignore, however you can
set this property directly using the Camera.id property:
Customized WebGL render nodes of this Game Object. RenderNodes are responsible for managing the rendering process of this Game Object. A default set of RenderNodes is coded into the engine, but the renderer will check this object first to see if a custom node has been set.
A Data Manager.
It allows you to store, query and get key/value paired information specific to this Game Object.
null by default. Automatically created if you use getData or setData or setDataEnabled.
The color of the body outline when it renders to the debug display.
Set to true to have this body render its outline to the debug display.
Set to true to have this body render a velocity marker to the debug display.
The default RenderNodes for this Game Object. RenderNodes are responsible for managing the rendering process of this Game Object. These are the nodes that are used if no custom ones are set.
RenderNodes are identified by a unique key for their role.
Common role keys include:
The depth of this Game Object within the Scene. Ensure this value is only ever set to a number data-type.
The depth is also known as the 'z-index' in some environments, and allows you to change the rendering order of Game Objects, without actually moving their position in the display list.
The default depth is zero. A Game Object with a higher depth value will always render in front of one with a lower value.
Setting the depth will queue a depth sort event within the Scene.
The displayed height of this Game Object.
This value takes into account the scale factor.
Setting this value will adjust the Game Object's scale property.
Holds a reference to the Display List that contains this Game Object.
This is set automatically when this Game Object is added to a Scene or Layer.
You should treat this property as being read-only.
The horizontal display origin of this Game Object, expressed in pixels.
Unlike originX, which is a normalized value between 0 and 1, the display origin is the
calculated pixel offset derived from the Game Object's width multiplied by its originX value.
Setting this property updates originX accordingly.
The vertical display origin of this Game Object, expressed in pixels.
Unlike originY, which is a normalized value between 0 and 1, the display origin is the
calculated pixel offset derived from the Game Object's height multiplied by its originY value.
Setting this property updates originY accordingly.
The displayed width of this Game Object.
This value takes into account the scale factor.
Setting this value will adjust the Game Object's scale property.
The Camera used for filters. You can use this to alter the perspective of filters. It is not necessary to use this camera for ordinary rendering.
This is only available if you use the enableFilters method.
ReadonlyfiltersThe filter lists for this Game Object.
This is an object with internal and external properties.
Each list is a Phaser.GameObjects.Components.FilterList object.
This is only available if you use the enableFilters method.
Whether filterCamera should update every frame
to focus on the Game Object.
Disable this if you want to manually control the camera.
Whether the filters should focus on the context, rather than attempt to focus on the Game Object. This is enabled automatically when enabling filters on objects which don't have well-defined bounds.
This effectively sets the internal filters to render the same way as the external filters.
This is only used if filtersAutoFocus is enabled.
The "context" is the framebuffer to which the Game Object is rendered. This is usually the main framebuffer, but might be another framebuffer. It can even be several different framebuffers if the Game Object is rendered multiple times.
Whether the Filters component should always draw to a framebuffer, even if there are no active filters.
The horizontally flipped state of the Game Object.
A Game Object that is flipped horizontally will render inverted on the horizontal axis. Flipping always takes place from the middle of the texture and does not impact the scale value. If this Game Object has a physics body, it will not change the body. This is a rendering toggle only.
The vertically flipped state of the Game Object.
A Game Object that is flipped vertically will render inverted on the vertical axis (i.e. upside down). Flipping always takes place from the middle of the texture and does not impact the scale value. If this Game Object has a physics body, it will not change the body. This is a rendering toggle only.
The Texture Frame this Game Object is using to render with.
ReadonlyhasA property indicating that a Game Object has this component.
The native (un-scaled) height of this Game Object.
Changing this value will not change the size that the Game Object is rendered in-game.
For that you need to either set the scale of the Game Object (setScale) or use
the displayHeight property.
This Game Object will ignore all calls made to its destroy method if this flag is set to true.
This includes calls that may come from a Group, Container or the Scene itself.
While it allows you to persist a Game Object across Scenes, please understand you are entirely
responsible for managing references to and from this Game Object.
If this Game Object is enabled for input then this property will contain an InteractiveObject instance.
Not usually set directly. Instead call GameObject.setInteractive().
A boolean flag indicating if this Game Object is being cropped or not.
You can toggle this at any time after setCrop has been called, to turn cropping on or off.
Equally, calling setCrop with no arguments will reset the crop and disable it.
ReadonlyisWhether this Game Object has been destroyed. Check this property to avoid bugs caused by calling methods on a destroyed Game Object, e.g. in a Tween or Timer.
This is a read-only property that is automatically set to true
when the Game Object is destroyed.
You should not set this property directly.
It is set before preDestroy is called or the DESTROY event is emitted.
ReadonlyisDoes this Game Object have a tint applied?
Returns true if any of the four corner tint values differ from 0xffffff,
or if the tintMode property is set to anything other than MULTIPLY,
or if any of the four secondary corner tint values differ from 0x000000.
Returns false in the default untinted state.
ReadonlylightingControls whether this Game Object participates in the WebGL lighting system.
When true, the object will respond to dynamic lights added via the Lights plugin,
using normal maps to calculate per-pixel diffuse lighting.
This flag is used to select the appropriate WebGL shader at render time.
The Mask this Game Object is using during render, or null if no mask has been set.
The maximum size of the base filter texture. Filters may use a larger texture after the base texture is rendered. The maximum texture size is at least 4096 in WebGL, based on the hardware. You may set this lower to save memory or prevent resizing.
The name of this Game Object. Empty by default and never populated by Phaser, this is left for developers to use.
The horizontal origin of this Game Object.
The origin maps the relationship between the size and position of the Game Object.
The default value is 0.5, meaning all Game Objects are positioned based on their center.
Setting the value to 0 means the position now relates to the left of the Game Object.
Set this value with setOrigin().
The vertical origin of this Game Object.
The origin maps the relationship between the size and position of the Game Object.
The default value is 0.5, meaning all Game Objects are positioned based on their center.
Setting the value to 0 means the position now relates to the top of the Game Object.
Set this value with setOrigin().
The parent Container of this Game Object, if it has one.
Whether any filters should be rendered on this Game Object.
This is true by default, even if there are no filters yet.
Disable this to skip filter rendering.
Use willRenderFilters() to see if there are any active filters.
The flags that are compared against RENDER_MASK to determine if this Game Object will render or not.
The bits are 0001 | 0010 | 0100 | 1000 set by the components Visible, Alpha, Transform and Texture respectively.
If those components are not used by your custom class then you can use this bitmask as you wish.
An object to store render node specific data in, to be read by the render nodes this Game Object uses.
Render nodes store their data under their own name, not their role.
The angle of this Game Object in radians.
Phaser uses a right-hand clockwise rotation system, where 0 is right, PI/2 is down, +-PI is left and -PI/2 is up.
If you prefer to work in degrees, see the angle property instead.
This is a special setter that allows you to set both the horizontal and vertical scale of this Game Object
to the same value, at the same time. When reading this value the result returned is (scaleX + scaleY) / 2.
Use of this property implies you wish the horizontal and vertical scales to be equal to each other. If this
isn't the case, use the scaleX or scaleY properties instead.
The horizontal scale of this Game Object.
The vertical scale of this Game Object.
A reference to the Scene to which this Game Object belongs.
Game Objects can only belong to one Scene.
You should consider this property as being read-only. You cannot move a Game Object to another Scene by simply changing it.
The horizontal scroll factor of this Game Object.
The scroll factor controls the influence of the movement of a Camera upon this Game Object.
When a camera scrolls it will change the location at which this Game Object is rendered on-screen. It does not change the Game Objects actual position values.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Game Object.
Please be aware that scroll factor values other than 1 are not taken into consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
The vertical scroll factor of this Game Object.
The scroll factor controls the influence of the movement of a Camera upon this Game Object.
When a camera scrolls it will change the location at which this Game Object is rendered on-screen. It does not change the Game Objects actual position values.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Game Object.
Please be aware that scroll factor values other than 1 are not taken into consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
Configuration object controlling self-shadowing for this Game Object.
Self-shadowing causes surfaces to cast contact shadows on themselves based on
the normal map, giving the appearance of depth. It is only active when
lighting is also enabled.
If enabled is null, the value from the game config option render.selfShadow
is used instead.
This object is used to select and configure the appropriate WebGL shader at render time.
The current state of this Game Object.
Phaser itself will never modify this value, although plugins may do so.
Use this property to track the state of a Game Object during its lifetime. For example, it could change from a state of 'moving', to 'attacking', to 'dead'. The state value should be an integer (ideally mapped to a constant in your game code), or a string. These are recommended to keep it light and simple, with fast comparisons. If you need to store complex data about your Game Object, look at using the Data Component instead.
The Tab Index of the Game Object. Reserved for future use by plugins and the Input Manager.
The Texture this Game Object is using to render with.
The tint value being applied to the whole of the Game Object.
Returns the value of tintTopLeft when read. When written, the same
color value is applied to all four corner tint properties (tintTopLeft,
tintTopRight, tintBottomLeft, and tintBottomRight) simultaneously.
The secondary tint value being applied to the bottom-left vertex of the Game Object. Used in two-color tint modes. This value is interpolated from the corner to the center of the Game Object. The value should be set as a hex number, i.e. 0xff0000 for red, or 0xff00ff for purple.
The secondary tint value being applied to the bottom-right vertex of the Game Object. Used in two-color tint modes. This value is interpolated from the corner to the center of the Game Object. The value should be set as a hex number, i.e. 0xff0000 for red, or 0xff00ff for purple.
The secondary tint value being applied to the top-left vertex of the Game Object. Used in two-color tint modes. This value is interpolated from the corner to the center of the Game Object. The value should be set as a hex number, i.e. 0xff0000 for red, or 0xff00ff for purple.
The secondary tint value being applied to the top-right vertex of the Game Object. Used in two-color tint modes. This value is interpolated from the corner to the center of the Game Object. The value should be set as a hex number, i.e. 0xff0000 for red, or 0xff00ff for purple.
The tint value being applied to the bottom-left vertex of the Game Object. This value is interpolated from the corner to the center of the Game Object. The value should be set as a hex number, i.e. 0xff0000 for red, or 0xff00ff for purple.
The tint value being applied to the bottom-right vertex of the Game Object. This value is interpolated from the corner to the center of the Game Object. The value should be set as a hex number, i.e. 0xff0000 for red, or 0xff00ff for purple.
The tint mode to use when applying the tint to the texture.
Available modes are:
Note that in Phaser 3, tint mode and color were set at the same time. In Phaser 4 they are separate settings.
The tint value being applied to the top-left vertex of the Game Object. This value is interpolated from the corner to the center of the Game Object. The value should be set as a hex number, i.e. 0xff0000 for red, or 0xff00ff for purple.
The tint value being applied to the top-right vertex of the Game Object. This value is interpolated from the corner to the center of the Game Object. The value should be set as a hex number, i.e. 0xff0000 for red, or 0xff00ff for purple.
A textual representation of this Game Object, i.e. sprite.
Used internally by Phaser but is available for your own custom classes to populate.
The current vertex rounding mode of this Game Object. This is used by the WebGL Renderer to determine how to round the vertex positions. It can have several values:
off - No rounding is applied.safe - Rounding is applied if the object is 'safe'.safeAuto - Rounding is applied if the object is 'safe' and the camera has roundPixels enabled.full - Rounding is always applied.fullAuto - Rounding is always applied if the camera has roundPixels enabled.A 'safe' object is one that is not rotated or scaled by any transform matrix while rendering. The effective transform is a simple translation. In such cases, rounding will affect all vertices the same way.
Using full rounding can cause vertices to wobble, because they might not be aligned to the pixel grid. Full rounding gives a janky look like PS1 games.
You can use other values if you want to create your own custom rounding modes.
The visible state of the Game Object.
An invisible Game Object will skip rendering, but will still process update logic.
The w position of this Game Object.
The native (un-scaled) width of this Game Object.
Changing this value will not change the size that the Game Object is rendered in-game.
For that you need to either set the scale of the Game Object (setScale) or use
the displayWidth property.
The x position of this Game Object.
The y position of this Game Object.
The z position of this Game Object.
Note: The z position does not control the rendering order of 2D Game Objects. Use Phaser.GameObjects.Components.Depth#depth instead.
Static ReadonlyRENDER_The bitmask that GameObject.renderFlags is compared against to determine if the Game Object will render or not.
Adds the given Collision Category to the list of those that this Arcade Physics Body will collide with.
The collision category to add to this body's collision mask.
This Game Object.
This callback is invoked when this Game Object is added to a Scene.
Can be overridden by custom Game Objects, but be aware of some Game Objects that will use this, such as Sprites, to add themselves into the Update List.
You can also listen for the ADDED_TO_SCENE event from this Game Object.
Add a listener for a given event.
The event name.
The listener function.
Optionalcontext: any
The context to invoke the listener with. Default this.
this.
Adds a render step function to this Game Object's WebGL render pipeline.
The first render step in _renderSteps is run first.
It should call the next render step in the list.
This allows render steps to control the rendering flow.
The render step function to add.
Optionalindex: number
The index in the render list to add the step to. Omit to add to the end.
This Game Object instance.
Adds this Game Object to the given Display List.
If no Display List is specified, it will default to the Display List owned by the Scene to which this Game Object belongs.
A Game Object can only exist on one Display List at any given time, but may move freely between them.
If this Game Object is already on another Display List when this method is called, it will first be removed from it, before being added to the new list.
You can query which list it is on by looking at the Phaser.GameObjects.GameObject#displayList property.
If a Game Object isn't on any display list, it will not be rendered. If you just wish to temporarily
disable it from rendering, consider using the setVisible method, instead.
OptionaldisplayList: DisplayList | Layer
The Display List to add to. Defaults to the Scene Display List.
This Game Object.
Adds this Game Object to the Update List belonging to the Scene.
When a Game Object is added to the Update List it will have its preUpdate method called
every game frame. This method is passed two parameters: time and delta.
If you wish to run your own logic within preUpdate then you should always call
super.preUpdate(time, delta) within it, or it may fail to process required operations,
such as Sprite animations.undefined
This Game Object.
Clears all alpha values associated with this Game Object.
Immediately sets the alpha levels back to 1 (fully opaque).undefined
This Game Object instance.
Clears the mask that this Game Object was using.
This only works in the Canvas Renderer. In WebGL, use a Mask filter instead (see Phaser.GameObjects.Components.FilterList#addMask).
OptionaldestroyMask: boolean
Destroy the mask before clearing it? Default false.
This Game Object instance.
Clears all tint values associated with this Game Object.
Immediately sets the color values back to 0xffffff and the tint mode to MULTIPLY,
which results in no visible change to the texture.undefined
This Game Object instance.
Copies an object's coordinates to this Game Object's position.
An object with numeric 'x', 'y', 'z', or 'w' properties. Undefined values are not copied.
This Game Object instance.
Creates and returns a Geometry Mask. This mask can be used by any Game Object, including this one.
To create the mask you need to pass in a reference to a Graphics Game Object.
If you do not provide a graphics object, and this Game Object is an instance of a Graphics object, then it will use itself to create the mask.
This means you can call this method to create a Geometry Mask from any Graphics Game Object.
This only works in the Canvas Renderer. In WebGL, use a Mask filter instead (see Phaser.GameObjects.Components.FilterList#addMask).
This Geometry Mask that was created.
Destroys this Game Object removing it from the Display List and Update List and severing all ties to parent resources.
Also removes itself from the Input Manager and Physics Manager if previously enabled.
Use this to remove a Game Object from your game if you don't ever plan to use it again. As long as no reference to it exists within your own code it should become free for garbage collection by the browser.
If you just want to temporarily disable an object then look at using the Game Object Pool instead of destroying it, as destroyed objects cannot be resurrected.
OptionalfromScene: boolean
True if this Game Object is being destroyed by the Scene, false if not. Default false.
Stops and disables this Game Object's Arcade Physics Body. The body's velocity is
set to zero and it is removed from collision and overlap detection within the physics
simulation. Optionally sets the Game Object's active and visible properties to
false at the same time, which is useful when deactivating pooled Game Objects.
OptionaldisableGameObject: boolean
Also set this Game Object's active to false. Default false.
OptionalhideGameObject: boolean
Also set this Game Object's visible to false. Default false.
This Game Object.
If this Game Object has previously been enabled for input, this will disable it.
An object that is disabled for input stops processing or being considered for
input events, but can be turned back on again at any time by simply calling
setInteractive() with no arguments provided.
If want to completely remove interaction from this Game Object then use removeInteractive instead.
OptionalresetCursor: boolean
Should the currently active Input cursor, if any, be reset to the default cursor? Default false.
This GameObject.
Calls each of the listeners registered for a given event.
The event name.
Additional arguments that will be passed to the event handler.
true if the event had listeners, else false.
Enables this Game Object's Arcade Physics Body, allowing it to participate in
collision and overlap detection within the physics simulation. Optionally resets
the Body and repositions the Game Object at the given coordinates. If you reset
the Body you must also pass x and y. You can also optionally set the Game
Object's active and visible properties at the same time.
Optionalreset: boolean
Also reset the Body and place the Game Object at (x, y).
Optionalx: number
The horizontal position to place the Game Object, if reset is true.
Optionaly: number
The vertical position to place the Game Object, if reset is true.
OptionalenableGameObject: boolean
Also set this Game Object's active to true.
OptionalshowGameObject: boolean
Also set this Game Object's visible to true.
This Game Object.
Enable this Game Object to have filters.
You need to call this method if you want to use the filterCamera
and filters properties. It sets up the necessary data structures.
You may disable filter rendering with the renderFilters property.
This is a WebGL only feature. It will return early if not available.undefined
undefined
Return an array listing the events for which the emitter has registered listeners.undefined
undefined
Focus the filter camera.
This sets the size and position of the filter camera to match the GameObject.
This is called automatically on render if filtersAutoFocus is enabled.
This will focus on the GameObject's raw dimensions if available. If the GameObject has no dimensions, this will focus on the context: the camera belonging to the DrawingContext used to render the GameObject. Context focus occurs during rendering, as the context is not known until then.undefined
undefined
Focus the filter camera on a specific camera.
This is used internally when filtersFocusContext is enabled.
The camera to focus on.
undefined
Manually override the focus of the filter camera.
This allows you to set the size and position of the filter camera manually.
It deactivates filtersAutoFocus when called.
The camera will set scroll to place the game object at the
given position within a rectangle of the given width and height.
For example, calling focusFiltersOverride(400, 200, 800, 600)
will focus the camera to place the object's center
100 pixels above the center of the camera (which is at 400x300).
Optionalx: number
The x-coordinate of the focus point, relative to the filter size. Default is the center.
Optionaly: number
The y-coordinate of the focus point, relative to the filter size. Default is the center.
Optionalwidth: number
The width of the focus area. Default is the filter width.
Optionalheight: number
The height of the focus area. Default is the filter height.
undefined
Gets the bottom-center coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Gets the bottom-left corner coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Gets the bottom-right corner coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Gets the axis-aligned bounding rectangle of this Game Object, regardless of origin.
The bounding rectangle is computed by retrieving all four corner positions of the Game Object (top-left, top-right, bottom-left, bottom-right), applying any rotation and parent Container transforms, and then calculating the smallest axis-aligned rectangle that fully encloses all four points.
The values are stored and returned in a Rectangle, or Rectangle-like, object.
Optionaloutput: O
An object to store the values in. If not provided a new Rectangle will be created.
The values stored in the output object.
Gets the center coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Retrieves the value for the given key in this Game Objects Data Manager, or undefined if it doesn't exist.
You can also access values via the values object. For example, if you had a key called gold you can do either:
sprite.getData('gold');
Or access the value directly:
sprite.data.values.gold;
You can also pass in an array of keys, in which case an array of values will be returned:
sprite.getData([ 'gold', 'armor', 'health' ]);
This approach is useful for destructuring arrays in ES6.
The key of the value to retrieve, or an array of keys.
The value belonging to the given key, or an array of values, the order of which will match the input array.
Returns a reference to the underlying display list array that contains this Game Object, which will be either the Scene's Display List or the internal list belonging to its parent Container, if it has one.
If this Game Object is not on a display list or in a container, it will return null.
You should be very careful with this method, and understand that it returns a direct reference to the internal array used by the Display List. Mutating this array directly can cause all kinds of subtle and difficult to debug issues in your game.undefined
The internal Display List array of Game Objects, or null.
Returns an array containing the display list index of either this Game Object, or if it has one, its parent Container. It then iterates up through all of the parent containers until it hits the root of the display list (which is index 0 in the returned array).
Used internally by the InputPlugin but also useful if you wish to find out the display depth of this Game Object and all of its ancestors.undefined
An array of display list position indexes.
Gets the left-center coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Takes the given x and y coordinates and converts them into local space for this
Game Object, taking into account parent and local transforms, and the Display Origin.
The returned Vector2 contains the translated point in its properties.
A Camera needs to be provided in order to handle modified scroll factors. If no
camera is specified, it will use the main camera from the Scene to which this
Game Object belongs.
The translated point.
Gets the local transform matrix for this Game Object.
OptionaltempMatrix: TransformMatrix
The matrix to populate with the values from this Game Object.
The populated Transform Matrix.
Gets the sum total rotation of all of this Game Object's parent Containers.
The returned value is in radians and will be zero if this Game Object has no parent container.undefined
The sum total rotation, in radians, of all parent containers of this Game Object.
Gets the right-center coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Gets the top-center coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Gets the top-left corner coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Gets the top-right corner coordinate of this Game Object, regardless of origin.
The returned point is calculated in local space and does not factor in any parent Containers,
unless the includeParent argument is set to true.
Optionaloutput: O
An object to store the values in. If not provided a new Vector2 will be created.
OptionalincludeParent: boolean
If this Game Object has a parent Container, include it (and all other ancestors) in the resulting vector? Default false.
The values stored in the output object.
Gets the world position of this Game Object, factoring in any parent Containers.
Optionalpoint: Vector2
A Vector2, or point-like object, to store the result in.
OptionaltempMatrix: TransformMatrix
A temporary matrix to hold the Game Object's values.
OptionalparentMatrix: TransformMatrix
A temporary matrix to hold parent values.
The world position of this Game Object.
Gets the world transform matrix for this Game Object, factoring in any parent Containers.
OptionaltempMatrix: TransformMatrix
The matrix to populate with the values from this Game Object.
OptionalparentMatrix: TransformMatrix
A temporary matrix to hold parent values during the calculations.
The populated Transform Matrix.
Increase a value for the given key within this Game Object's Data Manager. If the key doesn't already exist in the Data Manager then it is created with a value of 0 before being increased.
If the Game Object has not been enabled for data (via setDataEnabled) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
When the value is first set, a setdata event is emitted from this Game Object.
The key to change the value for.
Optionalamount: number
The amount to increase the given key by. Pass a negative value to decrease the key. Default 1.
This GameObject.
Initializes the render nodes for this Game Object.
This method is called when the Game Object is added to the Scene. It is responsible for setting up the default render nodes this Game Object will use.
The default render nodes to set for this Game Object.
Return the number of listeners listening to a given event.
The event name.
The number of listeners.
Return the listeners registered for a given event.
The event name.
The registered listeners.
Remove the listeners of a given event.
The event name.
Optionalfn: Function
Only remove the listeners that match this function.
Optionalcontext: any
Only remove the listeners that have this context.
Optionalonce: boolean
Only remove one-time listeners.
this.
Add a listener for a given event.
The event name.
The listener function.
Optionalcontext: any
The context to invoke the listener with. Default this.
this.
Add a one-time listener for a given event. The listener is automatically removed the first time the event is emitted, so it will never be called more than once.
The event name.
The listener function.
Optionalcontext: any
The context to invoke the listener with. Default this.
this.
Syncs the Body's position and size with its parent Game Object. You don't need to call this for Dynamic Bodies, as it happens automatically. But for Static bodies it's a useful way of modifying the position of a Static Body in the Physics World, based on its Game Object.undefined
This Game Object.
Remove all listeners, or those of the specified event.
Optionalevent: string | symbol
The event name.
this.
Removes the given Collision Category from the list of those that this Arcade Physics Body will collide with.
The collision category to remove from this body's collision mask.
This Game Object.
This callback is invoked when this Game Object is removed from a Scene.
Can be overridden by custom Game Objects, but be aware of some Game Objects that will use this, such as Sprites, to remove themselves from the Update List.
You can also listen for the REMOVED_FROM_SCENE event from this Game Object.
Removes this Game Object from the Display List it is currently on.
A Game Object can only exist on one Display List at any given time, but may be freely removed and added back at a later stage.
You can query which list it is on by looking at the Phaser.GameObjects.GameObject#displayList property.
If a Game Object isn't on any Display List, it will not be rendered. If you just wish to temporarily
disable it from rendering, consider using the setVisible method, instead.undefined
This Game Object.
Removes this Game Object from the Scene's Update List.
When a Game Object is on the Update List, it will have its preUpdate method called
every game frame. Calling this method will remove it from the list, preventing this.
Removing a Game Object from the Update List will stop most internal functions working. For example, removing a Sprite from the Update List will prevent it from being able to run animations.undefined
This Game Object.
If this Game Object has previously been enabled for input, this will queue it for removal, causing it to no longer be interactive. The removal happens on the next game step, it is not immediate.
The Interactive Object that was assigned to this Game Object will be destroyed, removed from the Input Manager and cleared from this Game Object.
If you wish to re-enable this Game Object at a later date you will need to
re-create its InteractiveObject by calling setInteractive again.
If you wish to only temporarily stop an object from receiving input then use
disableInteractive instead, as that toggles the interactive state, where-as
this erases it completely.
If you wish to resize a hit area, don't remove and then set it as being
interactive. Instead, access the hitarea object directly and resize the shape
being used. I.e.: sprite.input.hitArea.setSize(width, height) (assuming the
shape is a Rectangle, which it is by default.)
OptionalresetCursor: boolean
Should the currently active Input cursor, if any, be reset to the default cursor? Default false.
This GameObject.
Remove the listeners of a given event.
The event name.
Optionalfn: Function
Only remove the listeners that match this function.
Optionalcontext: any
Only remove the listeners that have this context.
Optionalonce: boolean
Only remove one-time listeners.
this.
Render this object using filters.
This function's scope is not guaranteed, so it doesn't refer to this.
The WebGL Renderer instance to render with.
The Game Object being rendered.
The current drawing context.
OptionalparentMatrix: TransformMatrix
The parent matrix of the Game Object, if it has one.
OptionalrenderStep: number
The index of this function in the Game Object's list of render processes. Used to support multiple rendering functions. Default 0.
undefined
Run a step in the render process. This is called automatically by the Render module.
In most cases, it just runs the renderWebGL function.
When _renderSteps has more than one entry,
such as when Filters are enabled for this object,
it allows those processes to defer renderWebGL
and otherwise manage the flow of rendering.
The WebGL Renderer instance to render with.
The Game Object being rendered.
The current drawing context.
OptionalparentMatrix: TransformMatrix
The parent matrix of the Game Object, if it has one.
OptionalrenderStep: number
Which step of the rendering process should be run? Default 0.
OptionaldisplayList: GameObject[]
The display list which is currently being rendered. If not provided, it will be created with the Game Object.
OptionaldisplayListIndex: number
The index of the Game Object within the display list. Default 0.
Resets the Collision Category and Mask back to the defaults, which means the body will belong to category 1 and will collide with all other categories.undefined
This Game Object.
Resets the horizontal and vertical flipped state of this Game Object back to their default un-flipped state.undefined
This Game Object instance.
Move this Game Object so that it appears above the given Game Object.
This means it will render immediately after the other object in the display list.
Both objects must belong to the same display list, or parent container.
This method does not change this Game Objects depth value, it simply alters its list position.
The Game Object that this Game Object will be moved to be above.
This Game Object instance.
Sets the body's horizontal and vertical acceleration. If the vertical acceleration value is not provided, the vertical acceleration is set to the same value as the horizontal acceleration.
The horizontal acceleration, in pixels per second squared.
Optionaly: number
The vertical acceleration, in pixels per second squared. Default x.
This Game Object.
Sets the body's horizontal acceleration.
The horizontal acceleration, in pixels per second squared.
This Game Object.
Sets the body's vertical acceleration.
The vertical acceleration, in pixels per second squared.
This Game Object.
Sets the active property of this Game Object and returns this Game Object for further chaining.
A Game Object with its active property set to true will be updated by the Scenes UpdateList.
True if this Game Object should be set as active, false if not.
This GameObject.
Set the Alpha level of this Game Object. The alpha controls the opacity of the Game Object as it renders. Alpha values are provided as a float between 0, fully transparent, and 1, fully opaque.
If your game is running under WebGL you can optionally specify four different alpha values, each of which
correspond to the four corners of the Game Object. Under Canvas only the topLeft value given is used.
OptionaltopLeft: number
The alpha value used for the top-left of the Game Object. If this is the only value given it's applied across the whole Game Object. Default 1.
OptionaltopRight: number
The alpha value used for the top-right of the Game Object. WebGL only.
OptionalbottomLeft: number
The alpha value used for the bottom-left of the Game Object. WebGL only.
OptionalbottomRight: number
The alpha value used for the bottom-right of the Game Object. WebGL only.
This Game Object instance.
Sets the angle of this Game Object.
Optionaldegrees: number
The rotation of this Game Object, in degrees. Default 0.
This Game Object instance.
Sets the angular acceleration of the body.
In Arcade Physics, bodies cannot rotate. They are always axis-aligned. However, they can have angular motion, which is passed on to the Game Object bound to the body, causing them to visually rotate, even though the body remains axis-aligned.
The amount of angular acceleration, in degrees per second squared.
This Game Object.
Sets the angular drag of the body. Drag is applied to the current velocity, providing a form of deceleration.
The amount of drag, in degrees per second squared.
This Game Object.
Sets the angular velocity of the body.
In Arcade Physics, bodies cannot rotate. They are always axis-aligned. However, they can have angular motion, which is passed on to the Game Object bound to the body, causing them to visually rotate, even though the body remains axis-aligned.
The amount of angular velocity, in degrees per second.
This Game Object.
Move this Game Object so that it appears below the given Game Object.
This means it will render immediately under the other object in the display list.
Both objects must belong to the same display list, or parent container.
This method does not change this Game Objects depth value, it simply alters its list position.
The Game Object that this Game Object will be moved to be below.
This Game Object instance.
Sets the Blend Mode being used by this Game Object.
This can be a const, such as Phaser.BlendModes.SCREEN, or an integer, such as 4 (for Overlay)
Under WebGL only the following Blend Modes are available:
Canvas has more available depending on browser support.
You can also create your own custom Blend Modes in WebGL.
Blend modes have different effects under Canvas and WebGL, and from browser to browser, depending on support. Blend Modes also cause a WebGL batch flush should it encounter a new blend mode. For these reasons try to be careful about the construction of your Scene and the frequency with which blend modes are used.
The BlendMode value. Either a string, a CONST or a number.
This Game Object instance.
Sets the size of this physics body. Setting the size does not adjust the dimensions of the parent Game Object.
The new width of the physics body, in pixels.
The new height of the physics body, in pixels.
Optionalcenter: boolean
Should the body be re-positioned so its center aligns with the parent Game Object? Default true.
This Game Object.
Sets the bounce values of this body.
Bounce is the amount of restitution, or elasticity, the body has when it collides with another object. A value of 1 means that it will retain its full velocity after the rebound. A value of 0 means it will not rebound at all.
The amount of horizontal bounce to apply on collision. A float, typically between 0 and 1.
Optionaly: number
The amount of vertical bounce to apply on collision. A float, typically between 0 and 1. Default x.
This Game Object.
Sets the horizontal bounce value for this body. This is the amount of restitution applied on the x-axis when the body collides with another object. A value of 1 retains full horizontal velocity after the rebound. A value of 0 means no horizontal bounce at all.
The amount of horizontal bounce to apply on collision. A float, typically between 0 and 1.
This Game Object.
Sets the vertical bounce value for this body. This is the amount of restitution applied on the y-axis when the body collides with another object. A value of 1 retains full vertical velocity after the rebound. A value of 0 means no vertical bounce at all.
The amount of vertical bounce to apply on collision. A float, typically between 0 and 1.
This Game Object.
Sets this physics body to use a circle for collision instead of a rectangle.
The radius of the physics body, in pixels.
OptionaloffsetX: number
The amount to offset the body from the parent Game Object along the x-axis.
OptionaloffsetY: number
The amount to offset the body from the parent Game Object along the y-axis.
This Game Object.
Sets all of the Collision Categories that this Arcade Physics Body will collide with. You can either pass a single category value, or an array of them.
Calling this method will reset all of the collision categories, so only those passed to this method are enabled.
If you wish to add a new category to the existing mask, call
the addCollidesWith method.
If you wish to reset the collision category and mask, call
the resetCollisionCategory method.
The collision category to collide with, or an array of them.
This Game Object.
Sets whether this Body collides with the world boundary.
Optionally also sets the World Bounce values. If the Body.worldBounce is null, it's set to a new Phaser.Math.Vector2 first.
Optionalvalue: boolean
true if this body should collide with the world bounds, otherwise false. Default true.
OptionalbounceX: number
If given, this will replace the worldBounce.x value.
OptionalbounceY: number
If given, this will replace the worldBounce.y value.
OptionalonWorldBounds: boolean
If given this replaces the Body's onWorldBounds value.
This Game Object.
Sets the Collision Category that this Arcade Physics Body will use in order to determine what it can collide with.
It can only have one single category assigned to it.
If you wish to reset the collision category and mask, call
the resetCollisionCategory method.
The collision category to assign to this body. Typically a power of 2, such as 1, 2, 4, 8, and so on.
This Game Object.
Applies a crop to a texture based Game Object, such as a Sprite or Image.
The crop is a rectangle that limits the area of the texture frame that is visible during rendering.
Cropping a Game Object does not change its size, dimensions, physics body or hit area, it just changes what is shown when rendered.
The crop size as well as coordinates can not exceed the size of the texture frame.
The crop coordinates are relative to the texture frame, not the Game Object, meaning 0 x 0 is the top-left.
Therefore, if you had a Game Object that had an 800x600 sized texture, and you wanted to show only the left
half of it, you could call setCrop(0, 0, 400, 600).
It is also scaled to match the Game Object scale automatically. Therefore a crop rectangle of 100x50 would crop an area of 200x100 when applied to a Game Object that had a scale factor of 2.
You can either pass in numeric values directly, or you can provide a single Rectangle object as the first argument.
Call this method with no arguments at all to reset the crop, or toggle the property isCropped to false.
You should do this if the crop rectangle becomes the same size as the frame itself, as it will allow the renderer to skip several internal calculations.
Optionalx: number | Rectangle
The x coordinate to start the crop from. Cannot be negative or exceed the Frame width. Or a Phaser.Geom.Rectangle object, in which case the rest of the arguments are ignored.
Optionaly: number
The y coordinate to start the crop from. Cannot be negative or exceed the Frame height.
Optionalwidth: number
The width of the crop rectangle in pixels. Cannot exceed the Frame width.
Optionalheight: number
The height of the crop rectangle in pixels. Cannot exceed the Frame height.
This Game Object instance.
If this Body is using drag for deceleration this function controls how the drag is applied.
If set to true drag will use a damping effect rather than a linear approach. If you are
creating a game where the Body moves freely at any angle (i.e. like the way the ship moves in
the game Asteroids) then you will get a far smoother and more visually correct deceleration
by using damping, avoiding the axis-drift that is prone with linear deceleration.
If you enable this property then you should use far smaller drag values than with linear, as
they are used as a multiplier on the velocity. Values such as 0.95 will give a nice slow
deceleration, where-as smaller values, such as 0.5 will stop an object almost immediately.
true to use damping for deceleration, or false to use linear deceleration.
This Game Object.
Allows you to store a key value pair within this Game Objects Data Manager.
If the Game Object has not been enabled for data (via setDataEnabled) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
sprite.setData('name', 'Red Gem Stone');
You can also pass in an object of key value pairs as the first argument:
sprite.setData({ name: 'Red Gem Stone', level: 2, owner: 'Link', gold: 50 });
To get a value back again you can call getData:
sprite.getData('gold');
Or you can access the value directly via the values property, where it works like any other variable:
sprite.data.values.gold += 50;
When the value is first set, a setdata event is emitted from this Game Object.
If the key already exists, a changedata event is emitted instead, along an event named after the key.
For example, if you updated an existing key called PlayerLives then it would emit the event changedata-PlayerLives.
These events will be emitted regardless if you use this method to set the value, or the direct values setter.
Please note that the data keys are case-sensitive and must be valid JavaScript Object property strings.
This means the keys gold and Gold are treated as two unique values within the Data Manager.
The key to set the value for. Or an object of key value pairs. If an object the data argument is ignored.
Optionalvalue: any
The value to set for the given key. If an object is provided as the key this argument is ignored.
This GameObject.
Adds a Data Manager component to this Game Object.undefined
This GameObject.
Sets the debug values of this body.
Bodies will only draw their debug if debug has been enabled for Arcade Physics as a whole. Note that there is a performance cost in drawing debug displays. It should never be used in production.
Set to true to have this body render its outline to the debug display.
Set to true to have this body render a velocity marker to the debug display.
The color of the body outline when rendered to the debug display.
This Game Object.
Sets the color of the body outline when it renders to the debug display.
The color of the body outline when rendered to the debug display.
This Game Object.
Sets the depth of this Game Object. If the value argument is not provided, the depth defaults to 0.
The depth is also known as the 'z-index' in some environments, and allows you to change the rendering order of Game Objects, without actually moving their position in the display list.
A Game Object with a higher depth value will always render in front of one with a lower value.
Setting the depth will queue a depth sort event within the Scene.
The depth of this Game Object. Ensure this value is only ever a number data-type.
This Game Object instance.
Sets whether this Body should calculate its velocity based on its change in position every frame. The default, which is to not do this, means that you make this Body move by setting the velocity directly. However, if you are trying to move this Body via a Tween, or have it follow a Path, then you should enable this instead. This will allow it to still collide with other bodies, something that isn't possible if you're just changing its position directly.
Optionalvalue: boolean
true if the Body calculates velocity based on changes in position, otherwise false. Default true.
This Game Object.
Sets the display origin of this Game Object. The difference between this and setting the origin is that you can use pixel values for setting the display origin.
Optionalx: number
The horizontal display origin value. Default 0.
Optionaly: number
The vertical display origin value. If not defined it will be set to the value of x. Default x.
This Game Object instance.
Sets the display (rendered) size of this Game Object in pixels.
Unlike setSize, which changes the native logical dimensions without affecting rendering,
this method adjusts the scaleX and scaleY properties so that the Game Object appears
at exactly the given pixel dimensions in-game. It is equivalent to calculating and setting
the scale manually, but more convenient when you want to work in pixel values directly.
The width of this Game Object.
The height of this Game Object.
This Game Object instance.
Sets the body's horizontal and vertical drag. If the vertical drag value is not provided, the vertical drag is set to the same value as the horizontal drag.
Drag can be considered as a form of deceleration that will return the velocity of a body back to zero over time. It is the absolute loss of velocity due to movement, in pixels per second squared. The x and y components are applied separately.
When useDamping is true, this is 1 minus the damping factor.
A value of 1 means the Body loses no velocity.
A value of 0.95 means the Body loses 5% of its velocity per step.
A value of 0.5 means the Body loses 50% of its velocity per step.
Drag is applied only when acceleration is zero.
The amount of horizontal drag to apply.
Optionaly: number
The amount of vertical drag to apply. Default x.
This Game Object.
Sets the body's horizontal drag.
Drag can be considered as a form of deceleration that will return the velocity of a body back to zero over time. It is the absolute loss of velocity due to movement, in pixels per second squared. The x and y components are applied separately.
When useDamping is true, this is 1 minus the damping factor.
A value of 1 means the Body loses no velocity.
A value of 0.95 means the Body loses 5% of its velocity per step.
A value of 0.5 means the Body loses 50% of its velocity per step.
Drag is applied only when acceleration is zero.
The amount of horizontal drag to apply.
This Game Object.
Sets the body's vertical drag.
Drag can be considered as a form of deceleration that will return the velocity of a body back to zero over time. It is the absolute loss of velocity due to movement, in pixels per second squared. The x and y components are applied separately.
When useDamping is true, this is 1 minus the damping factor.
A value of 1 means the Body loses no velocity.
A value of 0.95 means the Body loses 5% of its velocity per step.
A value of 0.5 means the Body loses 50% of its velocity per step.
Drag is applied only when acceleration is zero.
The amount of vertical drag to apply.
This Game Object.
Sets whether the filter camera should automatically re-focus on the Game Object every frame.
Sets the filtersAutoFocus property.
Whether filters should be updated every frame.
undefined
Set whether the filters should focus on the context.
Sets the filtersFocusContext property.
Whether the filters should focus on the context.
undefined
Set whether the filters should always draw to a framebuffer.
Sets the filtersForceComposite property.
Whether the object should always draw to a framebuffer, even if there are no active filters.
undefined
Set the base size of the filter camera. This is the size of the texture that internal filters will be drawn to. External filters are drawn to the size of the context (usually the game canvas).
This is typically the size of the GameObject.
It is set automatically when the Game Object is rendered
and filtersAutoFocus is enabled.
Turn off auto focus to set it manually.
Technically, larger framebuffers may be used to provide padding. This is the size of the final framebuffer used for "internal" rendering.
Base width of the filter texture.
Base height of the filter texture.
undefined
Sets the horizontal and vertical flipped state of this Game Object.
A Game Object that is flipped will render inverted on the flipped axis. Flipping always takes place from the middle of the texture and does not impact the scale value. If this Game Object has a physics body, it will not change the body. This is a rendering toggle only.
The horizontal flipped state. false for no flip, or true to be flipped.
The vertical flipped state. false for no flip, or true to be flipped.
This Game Object instance.
Sets the horizontal flipped state of this Game Object.
A Game Object that is flipped horizontally will render inverted on the horizontal axis. Flipping always takes place from the middle of the texture and does not impact the scale value. If this Game Object has a physics body, it will not change the body. This is a rendering toggle only.
The flipped state. false for no flip, or true to be flipped.
This Game Object instance.
Sets the vertical flipped state of this Game Object.
A Game Object that is flipped vertically will render inverted on the vertical axis. Flipping always takes place from the middle of the texture and does not impact the scale value. If this Game Object has a physics body, it will not change the body. This is a rendering toggle only.
The flipped state. false for no flip, or true to be flipped.
This Game Object instance.
Sets the frame this Game Object will use to render with.
If you pass a string or index then the Frame has to belong to the current Texture being used by this Game Object.
If you pass a Frame instance, then the Texture being used by this Game Object will also be updated.
Calling setFrame will modify the width and height properties of your Game Object.
It will also change the origin if the Frame has a custom pivot point, as exported from packages like Texture Packer.
The name or index of the frame within the Texture, or a Frame instance.
OptionalupdateSize: boolean
Should this call adjust the size of the Game Object? Default true.
OptionalupdateOrigin: boolean
Should this call adjust the origin of the Game Object? Default true.
This Game Object instance.
Sets the friction of this game object's physics body. In Arcade Physics, friction is a special case of motion transfer from an "immovable" body to a riding body.
The amount of horizontal friction to apply, [0, 1].
Optionaly: number
The amount of vertical friction to apply, [0, 1]. Default x.
This Game Object.
Sets the horizontal friction of this game object's physics body. This can move a riding body horizontally when it collides with this one on the vertical axis.
The amount of friction to apply, [0, 1].
This Game Object.
Sets the vertical friction of this game object's physics body. This can move a riding body vertically when it collides with this one on the horizontal axis.
The amount of friction to apply, [0, 1].
This Game Object.
Sets the body gravity for both the X and Y axes. This is an acceleration applied to this body in addition to the world gravity, in pixels per second squared. Values can be positive or negative. Larger absolute values result in a stronger effect.
If only one value is provided, it will be used for both the X and Y axes.
The gravitational acceleration to be applied to the X-axis, in pixels per second squared.
Optionaly: number
The gravitational acceleration to be applied to the Y-axis, in pixels per second squared. If not specified, the X value will be used. Default x.
This Game Object.
Sets the body gravity applied to the X-axis. This is an acceleration in addition to the world gravity, in pixels per second squared. Use a positive value to pull the body to the right and a negative value to pull it to the left.
The gravitational acceleration to be applied to the X-axis, in pixels per second squared.
This Game Object.
Sets the body gravity applied to the Y-axis. This is an acceleration in addition to the world gravity, in pixels per second squared. Use a positive value to pull the body downward and a negative value to push it upward (against gravity).
The gravitational acceleration to be applied to the Y-axis, in pixels per second squared.
This Game Object.
Sets if this Body can be separated during collisions with other bodies.
When a body is immovable it means it won't move at all, not even to separate it from collision
overlap. If you just wish to prevent a body from being knocked around by other bodies, see
the setPushable method instead.
Optionalvalue: boolean
Whether this body should be immovable (true) or movable (false) during collisions. Default true.
This Game Object.
Pass this Game Object to the Input Manager to enable it for Input.
Input works by using hit areas, these are nearly always geometric shapes, such as rectangles or circles, that act as the hit area for the Game Object. However, you can provide your own hit area shape and callback, should you wish to handle some more advanced input detection.
If no arguments are provided it will try and create a rectangle hit area based on the texture frame the Game Object is using. If this isn't a texture-bound object, such as a Graphics or BitmapText object, this will fail, and you'll need to provide a specific shape for it to use.
You can also provide an Input Configuration Object as the only argument to this method.
OptionalhitArea: any
Either an input configuration object, or a geometric shape that defines the hit area for the Game Object. If not given it will try to create a Rectangle based on the texture frame.
Optionalcallback: HitAreaCallback
The callback that determines if the pointer is within the Hit Area shape or not. If you provide a shape you must also provide a callback.
OptionaldropZone: boolean
Should this Game Object be treated as a drop zone target? Default false.
This GameObject.
Enables or disables WebGL-based per-pixel lighting for this Game Object. When enabled, the object will respond to dynamic lights added to the scene via the Lights plugin, using a normal map for lighting calculations. Disabling lighting restores the standard unlit rendering path.
true to use lighting, or false to disable it.
This GameObject instance.
Sets the mask that this Game Object will use to render with.
The mask must have been previously created and must be a GeometryMask. This only works in the Canvas Renderer. In WebGL, use a Mask filter instead (see Phaser.GameObjects.Components.FilterList#addMask).
If a mask is already set on this Game Object it will be immediately replaced.
Masks are positioned in global space and are not relative to the Game Object to which they are applied. The reason for this is that multiple Game Objects can all share the same mask.
Masks have no impact on physics or input detection. They are purely a rendering component that allows you to limit what is visible during the render pass.
The mask this Game Object will use when rendering.
This Game Object instance.
Sets the mass of the physics body. Mass affects collision response -- heavier bodies push lighter ones more during collisions.
The new mass of the body. Must be a positive number.
This Game Object.
Sets the maximum velocity of the body.
The new maximum horizontal velocity, in pixels per second.
Optionaly: number
The new maximum vertical velocity, in pixels per second. Default x.
This Game Object.
Sets the name property of this Game Object and returns this Game Object for further chaining.
The name property is not populated by Phaser and is presented for your own use.
The name to be given to this Game Object.
This GameObject.
Sets the body offset. This allows you to adjust the difference between the center of the body and the x and y coordinates of the parent Game Object.
The amount to offset the body from the parent Game Object along the x-axis, in pixels.
Optionaly: number
The amount to offset the body from the parent Game Object along the y-axis, in pixels. Defaults to the value given for the x-axis. Default x.
This Game Object.
Sets the origin of this Game Object.
The values are given in the range 0 to 1.
Optionalx: number
The horizontal origin value. Default 0.5.
Optionaly: number
The vertical origin value. If not defined it will be set to the value of x. Default x.
This Game Object instance.
Sets the origin of this Game Object based on the Pivot values in its Frame.
If the Frame has a custom pivot point defined, the origin is set to match it.
If the Frame does not have a custom pivot, this method falls back to setOrigin(),
resetting the origin to the default value of 0.5 for both axes.undefined
This Game Object instance.
Sets the position of this Game Object.
Optionalx: number
The x position of this Game Object. Default 0.
Optionaly: number
The y position of this Game Object. If not set it will use the x value. Default x.
Optionalz: number
The z position of this Game Object. Default 0.
Optionalw: number
The w position of this Game Object. Default 0.
This Game Object instance.
Sets if this Body can be pushed by another Body.
A body that cannot be pushed will reflect back all of the velocity it is given to the colliding body. If that body is also not pushable, then the separation will be split between them evenly.
If you want your body to never move or separate at all, see the setImmovable method.
Optionalvalue: boolean
Whether this body can be pushed by collisions with another Body. Default true.
This Game Object.
Sets the position of this Game Object to be a random position within the confines of the given area.
If no area is specified a random position between 0 x 0 and the game width x height is used instead.
The position does not factor in the size of this Game Object, meaning that only the origin is guaranteed to be within the area.
Optionalx: number
The x position of the top-left of the random area. Default 0.
Optionaly: number
The y position of the top-left of the random area. Default 0.
Optionalwidth: number
The width of the random area.
Optionalheight: number
The height of the random area.
This Game Object instance.
Set whether the filters should be rendered.
Sets the renderFilters property.
Whether the filters should be rendered.
undefined
Sets or removes a property in the data object for a specific render node within renderNodeData.
If key is not set, it is created. If it is set, it is updated.
If value is undefined and key exists, the key is removed.
The render node to set the data for. If a string, it should be the name of the render node.
The key of the property to set.
The value to set the property to.
This Game Object instance.
Sets the RenderNode for a given role.
Also sets the relevant render node data object, if specified.
If the node cannot be set, no changes are made.
The key of the role to set the render node for.
The render node to set on this Game Object. Either a string, or a RenderNode instance. If null, the render node is removed, along with its data.
OptionalrenderNodeData: object
An object to store render node specific data in, to be read by the render nodes this Game Object uses.
OptionalcopyData: boolean
Should the data be copied from the renderNodeData object? Default false.
This Game Object instance.
Sets the rotation of this Game Object.
Optionalradians: number
The rotation of this Game Object, in radians. Default 0.
This Game Object instance.
Sets the scale of this Game Object.
Optionalx: number
The horizontal scale of this Game Object. Default 1.
Optionaly: number
The vertical scale of this Game Object. If not set it will use the x value. Default x.
This Game Object instance.
Sets the horizontal and vertical scroll factor of this Game Object. If only the x value is
provided, it is applied to both axes. This is a convenience method for setting scrollFactorX
and scrollFactorY in a single call.
The scroll factor controls the influence of the movement of a Camera upon this Game Object.
When a camera scrolls it will change the location at which this Game Object is rendered on-screen. It does not change the Game Objects actual position values.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Game Object.
Please be aware that scroll factor values other than 1 are not taken into consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
The horizontal scroll factor of this Game Object.
Optionaly: number
The vertical scroll factor of this Game Object. If not set it will use the x value. Default x.
This Game Object instance.
Configures the self-shadowing properties of this Game Object.
Self-shadowing uses the normal map to cast contact shadows on the surface itself,
giving the impression of depth and raised detail. It is only active when
lighting is also enabled on this Game Object.
Parameters that are undefined are left unchanged, allowing partial updates.
Optionalenabled: boolean
true to use self-shadowing, false to disable it, null to use the game default from config.render.selfShadow, or undefined to keep the setting.
Optionalpenumbra: number
The penumbra value for the shadow. Lower is sharper but more jagged. Default is 0.5.
OptionaldiffuseFlatThreshold: number
The texture brightness threshold at which the diffuse lighting will be considered flat. Range is 0-1. Default is 1/3.
This GameObject instance.
Sets the internal size of this Game Object, as used for frame or physics body creation.
This will not change the size that the Game Object is rendered in-game.
For that you need to either set the scale of the Game Object (setScale) or call the
setDisplaySize method, which is the same thing as changing the scale but allows you
to do so by giving pixel values.
If you have enabled this Game Object for input, changing the size will not change the
size of the hit area. To do this you should adjust the input.hitArea object directly.
The width of this Game Object.
The height of this Game Object.
This Game Object instance.
Sets the size of this Game Object to be that of the given Frame or the current Frame.
This will not change the size that the Game Object is rendered in-game.
For that you need to either set the scale of the Game Object (setScale) or call the
setDisplaySize method, which is the same thing as changing the scale but allows you
to do so by giving pixel values.
If you have enabled this Game Object for input with a custom hit area, changing the size of the Game Object will not change the
size of the hit area. If you wish to do this, you should adjust the input.hitArea object directly.
If you have enabled this Game Object for input without a custom hit area, the hit area will be automatically resized to match the size of the selected Frame.
Optionalframe: Frame
The frame to base the size of this Game Object on. The default is the current frame of the Game Object.
This Game Object instance.
Sets the current state of this Game Object.
Phaser itself will never modify the State of a Game Object, although plugins may do so.
For example, a Game Object could change from a state of 'moving', to 'attacking', to 'dead'. The state value should typically be an integer (ideally mapped to a constant in your game code), but could also be a string. It is recommended to keep it light and simple. If you need to store complex data about your Game Object, look at using the Data Component instead.
The state of the Game Object.
This GameObject.
Sets the texture and frame this Game Object will use to render with.
Textures are referenced by their string-based keys, as stored in the Texture Manager.
The key of the texture to be used, as stored in the Texture Manager.
Optionalframe: string | number
The name or index of the frame within the Texture.
This Game Object instance.
Sets the tint color on this Game Object.
The tint works by taking the pixel color values from the Game Objects texture, and then combining it with the color value of the tint. You can provide either one color value, in which case the whole Game Object will be tinted in that color. Or you can provide a color per corner. The colors are blended together across the extent of the Game Object.
To modify the tint color once set, either call this method again with new values or use the
tint property to set all colors at once. Or, use the properties tintTopLeft, tintTopRight,
tintBottomLeft and tintBottomRight to set the corner color values independently.
To remove a tint call clearTint.
The tint color is combined according to the tint mode.
By default, this is MULTIPLY.
Note that, in Phaser 3, this would also swap the tint mode if it was set
to fill. In Phaser 4, the tint mode is separate: use setTintMode.
OptionaltopLeft: number
The tint being applied to the top-left of the Game Object. If no other values are given this value is applied evenly, tinting the whole Game Object. Default 0xffffff.
OptionaltopRight: number
The tint being applied to the top-right of the Game Object.
OptionalbottomLeft: number
The tint being applied to the bottom-left of the Game Object.
OptionalbottomRight: number
The tint being applied to the bottom-right of the Game Object.
This Game Object instance.
Sets the secondary tint color on this Game Object. This is used in two-color tint modes. See Phaser.GameObjects.Components.Tint#setTint for more information.
OptionaltopLeft: number
The secondary tint being applied to the top-left of the Game Object. If no other values are given this value is applied evenly, tinting the whole Game Object. Default 0xffffff.
OptionaltopRight: number
The secondary tint being applied to the top-right of the Game Object.
OptionalbottomLeft: number
The secondary tint being applied to the bottom-left of the Game Object.
OptionalbottomRight: number
The secondary tint being applied to the bottom-right of the Game Object.
This Game Object instance.
Deprecated method which does nothing.
In Phaser 3, this would set the tint color, and set the tint mode to fill.
In Phaser 4, use gameObject.setTint(color).setTintMode(Phaser.TintModes.FILL) instead.
Sets the tint mode to use when applying the tint to the texture.
Note that, in Phaser 3, tint mode and color were set at the same time. In Phaser 4 they are separate settings.
The tint mode to use.
This Game Object instance.
Sets this Game Object to the back of the display list, or the back of its parent container.
Being at the back means it will render below everything else.
This method does not change this Game Objects depth value, it simply alters its list position.undefined
This Game Object instance.
Sets this Game Object to be at the top of the display list, or the top of its parent container.
Being at the top means it will render on top of everything else.
This method does not change this Game Objects depth value, it simply alters its list position.undefined
This Game Object instance.
Sets the velocity of the Body.
The horizontal velocity of the body, in pixels per second. Positive values move the body to the right, while negative values move it to the left.
Optionaly: number
The vertical velocity of the body, in pixels per second. Positive values move the body down, while negative values move it up. Default x.
This Game Object.
Sets the horizontal component of the body's velocity.
Positive values move the body to the right, while negative values move it to the left.
The new horizontal velocity, in pixels per second.
This Game Object.
Sets the vertical component of the body's velocity.
Positive values move the body down, while negative values move it up.
The new vertical velocity, in pixels per second.
This Game Object.
Sets the vertex round mode of this Game Object. This is used by the WebGL Renderer to determine how to round the vertex positions.
The vertex round mode to set. Can be 'off', 'safe', 'safeAuto', 'full' or 'fullAuto'.
This GameObject.
Sets the visibility of this Game Object.
An invisible Game Object will skip rendering, but will still process update logic.
The visible state of the Game Object.
This Game Object instance.
Sets the w position of this Game Object.
Optionalvalue: number
The w position of this Game Object. Default 0.
This Game Object instance.
Sets the x position of this Game Object.
Optionalvalue: number
The x position of this Game Object. Default 0.
This Game Object instance.
Sets the y position of this Game Object.
Optionalvalue: number
The y position of this Game Object. Default 0.
This Game Object instance.
Sets the z position of this Game Object.
Note: The z position does not control the rendering order of 2D Game Objects. Use Phaser.GameObjects.Components.Depth#setDepth instead.
Optionalvalue: number
The z position of this Game Object. Default 0.
This Game Object instance.
Removes all listeners from this EventEmitter. This method is called automatically by the Scene Systems when the parent Scene shuts down, ensuring that all event bindings are cleared and no stale references remain.
Toggle a boolean value for the given key within this Game Object's Data Manager. If the key doesn't already exist in the Data Manager then it is created with a value of false before being toggled to true.
If the Game Object has not been enabled for data (via setDataEnabled) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
When the value is first set, a setdata event is emitted from this Game Object.
The key to toggle the value for.
This GameObject.
Toggles the horizontal flipped state of this Game Object.
A Game Object that is flipped horizontally will render inverted on the horizontal axis. Flipping always takes place from the middle of the texture and does not impact the scale value. If this Game Object has a physics body, it will not change the body. This is a rendering toggle only.undefined
This Game Object instance.
Toggles the vertical flipped state of this Game Object.
A Game Object that is flipped vertically will render inverted on the vertical axis. Flipping always takes place from the middle of the texture and does not impact the scale value. If this Game Object has a physics body, it will not change the body. This is a rendering toggle only.undefined
This Game Object instance.
Returns a JSON representation of the Game Object.undefined
A JSON representation of the Game Object.
Override this method in your own custom Game Objects to perform per-frame update logic.
This method is called by the Scene's Update List on every game frame, if the Game Object
is on that list. It is not called automatically — the Game Object must be added to the
Update List via addToUpdateList or by having a preUpdate method.
This base implementation is intentionally empty, allowing Game Objects to be used in an Object Pool without requiring any update logic.
Any arguments that are passed to the update method.
Updates the Display Origin cached values internally stored on this Game Object. You don't usually call this directly, but it is exposed for edge-cases where you may.undefined
This Game Object instance.
Checks to see if the given Collision Category will collide with this Arcade Physics object or not.
Collision category value to test.
true if the given category will collide with this object, otherwise false.
Compares the renderMask with the renderFlags to see if this Game Object will render or not. Also checks the Game Object against the given Cameras exclusion list.
The Camera to check against this Game Object.
True if the Game Object should be rendered, otherwise false.
Whether this Game Object will render filters.
This is true if it has active filters,
and if the renderFilters property is also true.undefined
Whether the Game Object will render filters.
Checks if this Game Object should round its vertices,
based on the given Camera and the vertexRoundMode of this Game Object.
This is used by the WebGL Renderer to determine how to round the vertex positions.
You can override this method in your own custom Game Object classes to provide custom logic for vertex rounding.
The Camera to check against this Game Object.
If true, the object is only translated, not scaled or rotated.
True if the Game Object should be rounded, otherwise false.
An Arcade Physics Image is a standard Image Game Object with an Arcade Physics body and related physics components mixed in. It is the lightest-weight physics-enabled Game Object available in Arcade Physics, making it ideal for static scenery, collectibles, platforms, bullets, or any non-animated object that needs to participate in physics collisions and overlap checks.
The physics body can be either dynamic (affected by velocity, acceleration, and gravity) or static (immovable, used for platforms and boundaries). Physics behaviour is controlled via the mixed-in Arcade Physics components such as Velocity, Acceleration, Bounce, Gravity, and so on.
The key difference between an Arcade Image and an Arcade Sprite is that an Arcade Image cannot play texture-based animations. If you need frame animations, use
Phaser.Physics.Arcade.Spriteinstead. If you only need a static or programmatically-moved object without animations, the Arcade Image is the more efficient choice.You should not normally create an ArcadeImage directly. Instead, use the factory method
this.physics.add.image()from within a Scene, which creates the image and adds its body to the Arcade Physics world automatically.